C Range Undercounter Glasswashers

The recently upgraded C range still offers the same great simplicity, value for money and exceptional reliability as before, but all models are now fully automatic with soft touch controls and bright LED displays – these features not only improve the aesthetics, but have allowed the development of the machines to become self-diagnostic. This means that any error’s that may occur are automatically detected by the machine and significantly, the relevant error code will be displayed on the screen allowing problems to be resolved quickly… a great help to any service engineer.

GENERAL FEATURES

• 2 Year Warranty
• NEW molded rack guide on 350mm and 400mm units, giving partial double skin
• NEW molded wash tank for easy cleaning
• NEW surface scrap tray filters on all new models
• NEW dual flow wash pump on 400 & 450 models
• NEW alarms menu
• NEW parallel quick release wash & rinse arm design
• Bright LED display with soft touch controls
• Accurate detergent and rinse aid peristaltic dosing as standard
• Supplied with two open cup/glass racks
• Three standard cycle time options. SP button for further cycle options
• Cycle times can be tailored to site requirements
• Selectable energy saving mode
• Selectable thermostop ensures optimum rinse temperatures
• Automatic self-cleaning at end of service
• Operational self-diagnostics
• Twin traffic light display indicates machine status
• Drain pump optional on all models
• Reduced water consumption compared to previous models

TECHNICAL FEATURES

• Standard voltage 240V - single phase
• Supplied with molded 13amp plug
• Suitable for hot (max 50°C) or cold* water supply at 2 to 4 bar dynamic supply pressure
• Wash temperature 60°C (adjustable)
• Rinse temperature 65°C (adjustable)
• Cycle times 90/120/150 seconds
• Rack Size: 390mm
• Useable Height: 300mm
• Power kW: 2.8
• Amps Required: 13

Drain pump versions require a waste up-stand for correct operation.

Restrictive waste connections should be avoided for all installations.

*Machines fitted to cold water supplies will not be capable of running repeated short cycles, the cycle time will automatically be extended to allow recovery of correct operating temperatures.

Spare or Replacement Baskets are Available, Glasswasher stand also available.

ASK YOURSELF THE FOLLOWING -
1 - Space - The glasswasher that you are replacing or the new area you wish to place your new glasswasher into needs to be large enough to house your new glasswasher. Glasswasher can vary in size, so check the glasswasher you are looking to purchase will fit.

2 - Size - During the busy times how many glasses do you need to clean during 1 hour, Most glasswasher have a 2 minute cycle time, so in 1 hour most glasswashers can clean upto 30 baskets of glasses, to work out if the glasswasher you are looking at will clean enough glasses use this simple sum -
30 x number glasses per basket = total number glasses cleaned in 1 hour. (Please note that this is working on a 2 minute machine cycle divided by 60 minutes in 1 hour)

3 - Soft - Water Does your area suffer with moderate to hard water? If so we would recommend that you purchase a water softener, this will help prolong the life of you new glasswasher.

4 - Waste - Will your new glasswasher need help draining the water tank? It is recommended that gravity drain glasswasher should sit 100mm higher than the mains waste pipe. Should this not be possible then a fitted drain pump can assist with drainage.

INSTALLATION IS THE SOLE RESPONSIBILITY OF THE PURCHASER, ALTHOUGH IF INSTALLATION IS REQUIRED MANUFACTURERS DO OFFER THIS SERVICE. (PLEASE SEE PRICES BELOW). THE INSTALLATION PRICE IS BASED ON CONNECTION WITH TRAPPED WASTE AND ELECTRICAL ISOLATOR OR SWITCH SPUR WITH IN 1 METRE.

FREE UK (Mainland) DELIVERY