0 Item(s):
£0.00
/
£
CTS11F SUREFLOW COUNTER TOP BOILER 11LTR FILTERED
The SF range are an offshoot of our powerful CPF Series. They have slightly less styling and reduced diagnostic features and are not programmable, but offer substantial initial draw off and excellent hourly output at a highly competitive price. Both models feature built-in multi-functional filtration which can be adjusted to hard, medium and soft water.
Features and Benefits
· Basic fault self-diagnosis with LCD read out
· Built-in multi-purpose filtration
· Electronic temperature control for constant temperature at around 97°C
· Easy access for service and cleaning
· Long-life incoloy elements
· Boil dry protection
· Stainless steel drip tray included
· 28 litres per hour output
Installation
Easy to install on a stable worktop.
Plumbing
Designed for direct connection to a potable cold water supply using the 1.5 metres (3/4” BSP) hose supplied. An isolating valve should be installed between the supply and the heater. Rear supply connection and front overflow as standard.
Electrical
To be connected to 230 volt supply with a
suitable break capacity of 13 amps.
Construction
Brushed stainless steel case.
Stainless steel heating chamber.
Low voltage switching.
Two safety cut-outs.
The SF range are an offshoot of our powerful CPF Series. They have slightly less styling and reduced diagnostic features and are not programmable, but offer substantial initial draw off and excellent hourly output at a highly competitive price. Both models feature built-in multi-functional filtration which can be adjusted to hard, medium and soft water.
Features and Benefits
· Basic fault self-diagnosis with LCD read out
· Built-in multi-purpose filtration
· Electronic temperature control for constant temperature at around 97°C
· Easy access for service and cleaning
· Long-life incoloy elements
· Boil dry protection
· Stainless steel drip tray included
· 28 litres per hour output
Installation
Easy to install on a stable worktop.
Plumbing
Designed for direct connection to a potable cold water supply using the 1.5 metres (3/4” BSP) hose supplied. An isolating valve should be installed between the supply and the heater. Rear supply connection and front overflow as standard.
Electrical
To be connected to 230 volt supply with a
suitable break capacity of 13 amps.
Construction
Brushed stainless steel case.
Stainless steel heating chamber.
Low voltage switching.
Two safety cut-outs.
Write Your Own Review
| Specification | Height (mm): 610
Width (mm): 243
Depth (mm): 510
Rear connection clearance (mm): 50
Depth excluding drip tray (mm): 360
Tap clearance to drip tray (mm): 190
Tech Spec -
Power loading (kW): 3
Heat-up time (mins): 32
Recovery Rate (litres): 0.5
Stand by Power (kW/h): 0.088
Rapid Draw-Off (litres): 11
Rapid Draw-Off (cups): 60
Hourly Output (litres): 27
Hourly Output (cups): 162
* Based on 6 Cups Per Litre
|
|---|---|
Free UK mainland delivery for orders requires a minimum order value of £60 ex VAT. A delivery charge of £6.65 ex VAT will be charged for orders with a value of less than £60 ex VAT.
Free delivery only applies to UK Mainland orders. Deliveries outside of UK mainland, including the Scottish Highlands, Channel Islands, Northern Ireland and the Isle of Wight will be subject to an additional carriage charge. Please contact our sales team on 01256 769990 for further information and additional carriage costs.
Here at Ascot Wholesale, we're aware that for your business to have and maintain a competitive edge, it is increasingly critical that you have confidence in your suppliers. We try our best to give you that confidence and with our best price promise, if you find a product cheaper else where we'll match the price!
To find out more, contact our sales team on 01256 769990.
Validate your login
Login
Create New Account