Push Button Dispense Boiler

DB2000

Ideal for self-service, the DB2000 has an optional programmable locking system. This allows the unit to be ready for use at the touch of an electronic key and is perfect for high security users or where health and safety is a concern.

Features and Benefits

• Electronically controlled for constant temperatures
• Programmable down to 80°C if required
• Single push and hold dispense button
• Energy saving ECO mode
• Three set locking key fob (optional)
• Early warning LCD diagnostics
• Five water level sensors

Installation

Counter mounted with drip tray.

Plumbing

Designed for direct connection to a potable cold water supply using the 1.5 metre (3/4" BSP) hose supplied. An isolating valve should be installed between the supply and the heater. Rear supply connection and choice of rear or front overflow.

Electrical

To be connected to 230 volt supply with a suitable break capacity of 13 amps.

Construction

• Brushed stainless steel
• Stainless steel heating chamber
• Low voltage switching
• 2 safety cut-outs

Approvals

WRAS approved.

Technical Data

• Power Loading (kW): 3
• Rapid Draw-Off (Litres): 12
• Rapid Draw-Off (Cups): 72
• Hourly Output (Litres): 28
• Hourly Output (Cups): 168
• Height (mm): 608
• Width (mm): 260
• Depth (mm): 465
• Tap Clearance to Drip Tray (mm): 145
• Rear Connection Clearance (mm): 45